|
Measurement Range:
|
0 to 100 mph (0 to 45 m/s)
|
|
Resolution:
|
0.085 mph at 10 second reading interval
|
|
Accuracy:
|
±2.0 mph from 0 to 10 mph ±2.5% of reading from >10 to 100 mph
|
|
Starting Threshold:
|
1.75 mph
|
|
Reading Rate:
|
1 reading every second to 1 every 24 hours
|
|
Memory:
|
500,000 readings; software configurable memory wrap 250,000 readings in multiple start/stop
|
|
Wrap Around:
|
Yes
|
|
Start Modes:
|
• Immediate start
• Delay start up to 18 months
• Multiple pushbutton start/stop
|
|
Stop Modes:
|
• Manual through software
• Timed (specific date and time)
|
|
Multiple Start/Stop Mode:
|
Start and stop the device multiple times without having to download data or communicate with a PC
|
|
Multiple Start/Stop Mode Activation:
|
To start the device: Press and hold the pushbutton for 5 seconds, the green LED will flash during this time. The device has started logging. To stop the device: Press and hold the pushbutton for 5 seconds, the red LED will flash during this time. The device has stopped logging.
|
|
Real Time Recording:
|
The device may be used with PC to monitor and record data in real-time
|
|
LED Functionality:
|
Green LED blinks:
10 second rate to indicate logging 15 second rate to indicate delay start
Red LED blinks:
10 second rate to indicate low battery and / or full memory 1 second rate to indicate an alarm condition
|
|
Password Protection:
|
An optional password may be programmed into the device to restrict access to configuration options. Data may be read out without the password.
|
|
Engineering Units:
|
See the Wind101A Quick Setup Guide for instructions on how to program windspeed engineering units.
|
|
Battery Life:
|
10 years typical, dependent upon frequency and duty cycle
|
|
Time Accuracy:
|
±1 minute/month (at 20ºC/68ºF, stand alone data logging)
|
|
Computer Interface:
|
USB (interface cable included); 115,200 baud
|
|
Software:
|
XP SP3/Vista/Windows 7
|
|
Anemometer Operating Environment:
|
-55ºC to +60ºC (-67ºF to +150ºF); 0%RH to 100%RH
|
|
Data Logger Operating Environment:
|
-40ºC to +80ºC (-40ºF to +176ºF), 0%RH to 95%RH non-condensing
|
|
Anemometer Dimensions:
|
2.1” height x 7.53” Diameter (54mm height x 192 mm dia.) (mount post not included)
|
|
Housing Dimensions:
|
2.9” x 5.8” x 1.5” (74mm x 148mm x 39mm)
|
|
Weight:
|
18.1 oz (513 g)
|
|
Materials:
|
ABS Plastic
|
