The MadgeTech Volt101A-160mV data logger is a low cost, state-of-the-art data logger for measuring a voltage range of ±160 mV. The range and resolution of this particular data logger makes it ideal for low level signal monitoring, battery studies, current shunts and photovoltaic studies. The Volt101A-160mV offers a 10 year battery life, up to 4 Hz reading rate, a multiple start/stop function, ultra-high speed data download, 1 million reading storage capacity (optional memory wrap), battery life indicator, optional password protection, programmable high-low alarms and more. The compact size and removable terminal block on the device makes for easy retrieval and reconnection.
Simply use the MadgeTech Data Logger Software to easily configure and download data from the Volt101A-160mV. Graphical, tabular and summary data is provided for analysis and data can be displayed in multiple units, using the Engineering Units function. The data can also be exported to Excel® for further custom reporting and calculations.
|
Input Connection
|
Removable screw terminal
|
|
Voltage Range:
|
±160 mV
|
|
Voltage Revolution
|
5 ?V
|
|
Calibrated Accuracy
|
±0.01% FSR
|
|
Specified Accuracy Time
|
Nominal range @ 25 ºC
|
|
Input Impedance
|
>1M?
|
|
Analog Conversion Time
|
150 ms
|
|
Frequency Rejection
|
50/60Hz
|
|
Reading Rate:
|
4 readings every second up to 1 reading every 24 hours
|
|
Memory:
|
• 1,000,000 readings; software configurable memory wrap
• 330,000 readings in multiple start/stop mode
|
|
Wrap Around:
|
Yes
|
|
Start Mode
|
• Immediate start
• Delay start up to 18 months
• Multiple pushbutton start/stop
|
|
Stop Modes
|
• Manual through software
• Timed (specific date and time)
|
|
Multiple Start/Stop Mode
|
Start and stop the device multiple times without having to download data or communicate with a PC
|
|
Multiple Start/Stop Mode Activation
|
To start the device:
Press and hold the pushbutton for 5 seconds.
The device has started logging.
To stop the device:
Press and hold the pushbutton for 5 seconds, the red LED will flash for three seconds and then the green LED will flash for two seconds.
The device has stopped.
|
|
Real Time Recording
|
The device may be used with PC to
monitor and record data in real time**
|
|
Alarm
|
User selectable high and low limits; blinking LED for alarm and low battery
|
|
LED Funcionality
|
Green LED blinks:
10 seconds to indicate logging
15 seconds to indicate delay or manual start mode - standby (waiting to start)
Red LED blinks:
10 second rate to indicate low battery and/or memory
1 second to indicate an alarm condition
|
|
Password Protection
|
An optional password may be programmed into the device to restrict access to configuration options. Data may be read out without the password.
|
|
Engineering Units
|
Native measurement units can be scaled to display measurement units of another type. This is useful when monitoring voltage outputs from different types of sensors such as temperature, CO2, flow rate and more
|
|
Calibration:
|
Digital calibration through software
|
|
Calibration Date:
|
Automatically recorded within device
|
|
Battery Type:
|
3.6V lithium battery included; user replaceable
|
|
Battery Life
|
10 year battery life typical, at a 15 minute reading rate
|
|
Data Format
|
Date and time stamped V, mV, ?V, engineering units specified through software
|
|
Time Accuracy:
|
±1 minute/month (at 25 ºC, stand alone logging)
|
|
Computer Interface:
|
USB (interface cable required); 115,200 baud
|
|
Software:
|
XP SP3/Vista/Windows 7/Windows 8
MadgeTech Software 2.03 or higher required
|
|
Operating Environment
|
-40 ºC to +80 ºC, 0 %RH to 95 %RH non-condensing
|
|
Dimension
|
1.4 in x 2.2 in x 0.6 in (36 mm x 56 mm x 16 mm)
|
|
Weight:
|
0.9 oz (24 g)
|
|
Materials:
|
ABS plastic
|
|
Approvals:
|
CE
|
BATTERY WARNING: FIRE, EXPLOSION, AND SEVERE BURN HAZARD. DO NOT SHORT CIRCUIT, CHARGE, FORCE OVER DISCHARGE, DISASSEMBLE, CRUSH, PENETRATE OR INCINERATE. BATTERY MAY LEAK OR EXPLODE IF HEATED ABOVE 80 °C (176 °F)
