- 1-click report: full, audit-relevant documentation with just the click of a mouse
- Reduction of processing time with full compliance
- Acceptance criterion: No problem meeting "10?ilure rate"
- 21 CFR Part 11-compliant software:provides both novices and experts with optimum support for measuring processes
Its innovative design makes the testo 190 CFR data logger system the modern solution for the validation of sterilization and freeze-drying processes. The loggers' batteries can be changed quickly and safely without tools. This speeds up your processes enormously – and after the change, the loggers remain 100% tight. The system comprises four temperature loggers and one pressure logger with rigid and flexible probes, a multifunction case with integrated programming and readout units, as well as 21 CFR Part 11-compliant software.
The size of the data loggers can be varied by two different battery types. The battery types can be freely combined with all testo 190 data loggers. The user-friendly testo 190 CFR software and the special readout units in the case allow up to 8 data loggers to be read out and programmed simultaneously.
Overview of the system components
The CFR data loggers come in four temperature and one pressure models. They stand for robustness, durability and reliability. The thread means batteries can be safely changed in just a few seconds without any tools. Thanks to the logger's hermetically sealed design, it remains 100% tight even after the battery has been changed.
The multifunction case for the testo 190 completes the system. It is robust, smart and practical, not only providing storage for the data loggers, but also enabling configuration and readout. A programming and readout unit is installed in every case. This means that up to 8 data loggers can be configured and read out simultaneously.
The data loggers are programmed and read out using the intuitive testo 190 CFR software. No data export is needed for data analysis (e.g. in Excel). 1-click report means that full, audit-relevant documentation can be achieved with just one click of a mouse. 21 CFR Part 11-compliant of course. It is possible to read out a total of up to 254 loggers in one validation process.
Technical data / accessories
|
CFR data loggers
|
testo 190-T1
|
testo 190-T2
|
testo 190-T3
|
testo 190-T4
|
testo 190-P1
|
|
Measurement parameter / probe type
|
Temperature (Pt1000)
|
Pressure (piezoresistive sensor)
|
|
Measuring range
|
-50 to +140°C
|
1 mbar to 4 bar abs.
|
|
Accuracy
|
±0,2 °C (-50 to -40 °C)
±0,1 °C (-40 to +140 °C)
|
± 20 mbar
|
|
Resolution
|
0.01°C
|
1 mbar
|
|
Reading memory
|
60,000 readings
|
30,000 per channel
|
60,000 readings
|
|
Measuring cycle
|
1 s to 24 h
|
|
Storage temperature
|
-20 to +50°C
|
|
Dimensions
|
|
|
Logger with small battery
|
20 x 40 mm (Ø x H)
|
20 x 45 mm (Ø x H)
|
20 x 53 mm (Ø x H)
|
22 x 64 mm (Ø x H)
|
|
Logger with large battery
|
20 x 59 mm (Ø x H)
|
20 x 63 mm (Ø x H)
|
20 x 72 mm (Ø x H)
|
22 x 83 mm (Ø x H)
|
|
Probe shaft
|
3 x 25 mm
|
3 x 115 mm
|
1.5 x 775 mm
|
-
|
|
Probe shaft tip
|
–
|
3 x 25 mm
|
-
|
| |
|
|
|
|
|
|
|
|
Battery large (standard)
|
Battery type
|
½ AA lithium
|
|
Service life
|
2,500 operating hours (measuring cycle 10 seconds at 121°C)
|
|
Application range
|
-50 to +140°C
|
Battery small (Option)
|
Battery type
|
2 x button cell lithium
|
|
Service life
|
250 operating hours (measuring cycle 10 seconds at 121°C)
|
|
Application range
|
-20 to +140°C
|
|
testo 190 accessories Order no.
|
|
testo 190 small case, case for transport, storage, configuration and readout of testo 190 CFR data loggers.
Including USB cable and 1 programming and readout unit for a maximum of 8 data loggers. Dimensions: 340 x 265 x 60 mm.
|
0516 1901
|
|
testo 190 small battery, PEEK coated. For the power supply of all testo 190 models. Application range: -20 to +140°C.
|
0515 1900
|
|
testo 190 large battery, PEEK coated. For the power supply of all testo 190 models. Application range: -50 to +140°C.
|
0515 1901
|
|
testo 190 freeze-drying probe holder (puck) for more precise measurement of surface temperature with the testo 190-T3 and testo 190-T4.
|
0554 1907
|
|
Retaining clamps (5 off), to secure the loggers (testo 190-T1/-T2/-T3/-T4) in the application areas (e.g. in autoclaves).
|
0554 0297
|
|
Distance adapters short to secure the testo 190-T4 data logger in the programming and readout unit.
|
0554 0298
|
|
Distance adapters long to secure the testo 190-T1, testo 190-T2 and testo 190-T3 data loggers in the programming and readout unit.
|
0554 0299
|
|
ISO temperature calibration certificate (testo 190-T1/-T2/-T3/-T4), calibration points -50°C; 0°C; +90°C; +121°C; +140°C
|
0520 0141
|
|
DAkkS temperature calibration certificate (testo 190-T1/-T2/-T3/-T4), calibration points -50°C; 0°C; +90°C; +121°C; +140°C
|
0520 0281
|
|
ISO pressure calibration certificate (testo 190-P1), calibration points 200 / 1400 / 2600 / 3800 / 5000 mbar
|
0520 0025
|
|
DAkkS pressure calibration certificate (testo 190-P1), calibration points 200 / 800 / 1400 / 2000 / 2600 / 3200 / 3800 / 4400 / 5000 mbar
|
0520 0215
|
