| Pressure ranges |
| Instrumental measurement uncertainty | ± 0.015 % of reading (± 0.008 % optional) Note: For more information on the uncertainty, including the % reading threshold, please see technical note, 'Guide for the Uncertainty Analysis in Pressure When Using P3000 Series Deadweight Testers' |
| Mass and PCU materials of construction |
| Standard weight material | Series 3 non-magnetic austenitic stainless steel Density: 7.8 g/cm³ |
| Optional fine increment masses | Aluminum Density: 2.7 g/cm³ |
| Piston/Cylinder Specifications | • Models P3011, P3012, P3013, P3022, P3023, P3025 (V): - Piston Material: Ceramic - Cylinder Material: Martensitic steel - Coefficient of Expansion: 11 ppm/°C • Models P3014, P3015, P3025 (P), P3031, P3032 (P & V): - Piston Material: Tungsten carbide - Cylinder Material: Martensitic steel - Coefficient of Expansion: 16.5 ppm/°C |
| General |
| Test port adaptors | M14 X 1.5, M20 X 1.5, 1/8 in, 1/4 in, 3/8 in and 1/2 in NPT and BSP |
| Weight | 11 kg (24 lb) |
| Dimensions (W x D x H) | 440 mm x 300 mm x 215 mm (17.5 in x 12 in x 8.5 in) |
| Mass set weight (typical) | 29 kg (65 lb) |
| Weight increments |
| Minimum standard weight increments | |
| P3012, P3022 Pressure | 1 inH?O (5 mbar, 0.5 kPa) |
| P3013, P3023 Pressure | 2 inH?O (10 mbar, 1 kPa) |
| P3014, P3015, P3025 Pressure | 1 psi (0.1 bar, 10 kPa) |
| P3031, P3032 | 1 psi (0.1 bar, 10 kPa) |
| P3011, P3022, P3023, P3025 Vacuum | 0.2 inHg (10 mbar, 1 kPa) |
| Optional fractional weights | |
| P3014, P3015, P3025 Pressure | 0.1 psi (10 mbar, 1 kPa) |
| Built-in hand pumps |
| Pressure mode | Max pressure 300 psi (2 MPa) |
| Vacuum mode | To 90 % vacuum |
| Operating fluid for liquid lubricated models |
| Standard fluid | 55-655 mineral oil. For oxygen clean applications, please consult factory. |
